Question 1

How much water does one AI prompt actually use?

Accepted Answer

Published figures for a single prompt range from a fraction of a millilitre to more than half a litre, and almost all of the disagreement comes from what is being counted rather than from the underlying hardware. The smallest numbers count only water evaporated in the data centre's own cooling loop, on an efficient modern site, for a small model answering a short question. The largest numbers count a long answer from a frontier model plus the water consumed generating the electricity at power stations, which is usually several times bigger than the cooling water itself. Both can be defensible and neither is the whole picture on its own, which is why this calculator splits the two and lets you set each independently. For a mainstream model at typical answer lengths on a reasonably efficient site, the all-in figure usually lands in the low single-digit millilitres per request — meaningful at the scale of millions of requests a month, and small compared with almost anything else a person does in a day.

Question 2

What is the difference between on-site and off-site water?

Accepted Answer

On-site water is what the building itself consumes, mostly evaporated in cooling towers to reject the heat that servers produce. It is measured as water usage effectiveness, or WUE, in litres per kilowatt-hour of facility energy, and it varies enormously with climate and cooling design: a free-cooled site in a cold climate can be near zero, an evaporatively cooled site in a hot, dry region can be well above one litre per kilowatt-hour, and fully closed-loop or air-cooled designs consume essentially none on site while using more electricity. Off-site water is consumed somewhere else entirely, at the power stations that produced the electricity, through evaporation in thermoelectric cooling and from reservoirs. It scales with how the local grid generates power and is often the larger of the two. Reporting only on-site water makes an air-cooled data centre look free; reporting only off-site water ignores what the building does to local supply. The honest answer needs both, and the two respond to completely different decisions.

Question 3

Does running AI in a colder region really cut the water footprint?

Accepted Answer

It cuts the on-site half dramatically and the off-site half only if the grid also happens to be different. Cool, humid climates allow free cooling for most of the year, which is why sites in Ireland and the Nordics report water usage effectiveness an order of magnitude below the global average, while sites in hot dry regions lean on evaporative cooling precisely when local water is scarcest. That is a real and large difference, and it is the single biggest lever a provider controls. But the electricity behind the workload still carries its own water cost wherever it is generated, and that depends on the generating mix rather than the weather: a grid heavy in thermal generation consumes several litres per kilowatt-hour regardless of how cold the data centre is. So region choice can plausibly cut the total by half or more, but it cannot take it to zero, and the region table on this page is there to show the size of the effect rather than to suggest the problem disappears.

Question 4

How accurate are these numbers?

Accepted Answer

They are a transparent model, not a measurement, and every input is exposed precisely so you can see what drives the answer. Providers publish very little per-request energy data, so the energy-per-request figure is the weakest link and the one worth stress-testing: a reasoning model that thinks for thousands of tokens can use an order of magnitude more energy than a small model answering in one line, and the default presets here reflect broad published ranges rather than any specific vendor's measurement. Water usage effectiveness and grid water intensity are better documented but still vary by site, by season and by methodology, and providers report them inconsistently. Use this to understand the shape of the problem — which term dominates, how much region choice matters, what happens when volume grows tenfold — and treat any single headline figure, including the ones this page produces, with suspicion. If you need a number for a report, state your assumptions alongside it.

AI水フットプリント計算機

その水の体積はどのように見えるか

同じワークロード、異なるリージョン

エネルギーは入力です。水は生産物の一つです

この計算機の仕組み